Frontier 340: P2 solution level has fallen (w2632)

[KEDRED]

Hello,

I have Frontier 340.
Today I met with such error code:
"W-2632. P2 solution level has fallen"
Please recommend what can I do to have this error gone.

Regards,

Kosta

[rcs]

Hi Kosta,

I think you need to check СТР 15 connector on СТР24 PCB. Usually it is out of order.

BR

[yustas]

THANK YOU FOR YOUR CONTRIBUTION!

[rcs]

yes, welcome!
Sometimes the connector can be damaged by chemicals so I recommend having it dry and free of the chemicals.

[astramiello]

1. Is the level actually low?
If yes, add water. If no continue on

2. Remove and clean the level sensor.

3. Replace the level sensor.

4. Replace the harness.

5. Replace the board

[Fujifrontier]

Still same problem or you had solved?

[KEDRED]

Yes - I found the cause of the problem!
"rcs" was right!
СТР 15 connector on СТР24 PCB was rusted and I had to replace it.
Now all works well.

Thanks for attention!